مرکز آموزش
F5 Big IP پرینت این مقاله
After you obtain the certificate, you must copy it onto each BIG-IP Controller. You can configure certificates using the Configuration utility or from the command line.
Installation with Configuration utility
- click proxy in the navigation panel,
- window proxy will appear,
- click Install SSL Certificate Request tab,
- in the Certfile Name box type the name of domain with .crt extension,
- enter the certificate in the SSL Certificate section, do not forget the lines BEGIN CERTIFICATE and END CERTIFICATE,
- click Write Certificate File button to install certificate.
Installation with Command line
Copy the SSL to following directory on each BIG-IP Controller:
/config/bigconfig/ssl.crt/
If you used the genkey or gencert utilities to generate the CSR, a copy of the key should already be in:
/config/bigconfig/ssl.key/
Installation Intermediate CA with command line
Copy the intermediate CA certificate into each BIG-IP Controller. Open Intermediate certificate. Create a new file with it as intermediate-ca.crt (include also lines BEGIN and EN CERTIFICATE). Save file in /config/bigconfig/ssl.crt/
Note:
Certificates are stored in ssl.crt directory.
Before you configure the SSL Accelerator you must moved manually keys and certificates on both BIG-IP Controllers.
آیا این پاسخ به شما کمک کرد؟
مقالات مربوطه
SSL installation depends on the type of server you are securing. Please select below the server...
Installing SSL certificate on Apache with mod_ssl To install certificate you need 2...
Log in to admin server as a root. Create a folder /etc/httpd/ssl.crt/ (if it does not exist)....
Installing SSL certificate on Barracuda VPN serverImport CertificatesFrom the appliance web...
Note: If the domain/site certificate is created using CA certificate, you need to repeat steps...